SHE Solutions, LLC

Safety, Health, and Environmental - Training, Audits, & Compliance
Ken Mushet, CSP, REM - President/ Principal Consultant
581 W. Locust Dr., Chandler, AZ 85248
Office (480) 883-7218
www.shesolutions.com,  kmushet@shesolutions.com
 

 
   

Click here for On-line Construction Courses

    

The 30 Hour OSHA Construction Course is available as an on-line course, or we can come to your location and present it to your employees. 

If you have a small group of employees that need the OSHA training course, the on-line version may be more cost effective. 

Both of the options are outlined below.  You can click on the hard hat to get to the on-line course.

On-line Safety Courses Now Available!

  • Get your Department of Labor (DOL) Completion card by taking the OSHA accepted 10-hour or 30-hour course for construction or general industry on-line.

  • Click on the link above, enroll on-line, and complete the course at your pace to receive your DOL card by mail.

  • 24 X 7 access to job-critical online training.

  • Quality instructional content validated by industry experts.

  • Affordable courses available with minimal computer system requirements.

  • Corporate billing accounts available for high volume clients.

  • Presentation keeps employees engaged, not bored.

  • Safe on-line credit card transactions with HTTPS technology and SSL Encryption.

  • Visa ®, MasterCard ®, Discover ®, American Express ®, or Telecheck ®.

  • SHE Solutions, LLC has and affiliation with 360training.com to provide the on-line courses. The 10 and 30 Hour Courses are Powered by 360training.com. On-line 10 and 30-hour courses are accepted by OSHA. When you click on the link, you are taken to the SHE Solutions, LLC Virtual University on the 360training.com website.

  • Customer Support contact information for the 360training.com on-line courses is 888-360-TRNG.

  • The Outreach courses offered by 360training.com are OSHA accepted courses.

  • The SHE Solutions, LLC On-line training courses offered by 360training.com, Outreach Trainer is Michael Millsap (mike.millsap@360training.com)

  • If an on-line student is in need of proof of completion for their job site please have them email the On-line training courses Outreach Trainer listed above, and they will provide one if the student completes all requirements. A downloadable completion certificate is not provided.

  • Upon completion of the 10-hour or 30-hour course, you will receive a completion card from the Department of Labor within 4-8 weeks. You must complete the end of course survey to receive your card.
    NOTE: Please complete the OSHA survey at the end of the OSHA 10 hour or OSHA 30 Hour Outreach course. If you do not complete the OSHA mandated course survey within three (3) months of completion, 360training.com will not be able to issue a Department of Labor (DOL) card. If the 3 months has elapsed, you will be required to purchase the course again and retake the course from the beginning. If you are purchasing this course for your employee, please make them aware of this requirement.

  • Thank you for considering the on-line courses.

At your location, 30 Hour OSHA Construction Course

This course is part of the OSHA Outreach Training and participants who successfully complete the course will receive a 30 Hour Construction card directly from OSHA.   The course reviews the hazards associated in construction through a review of OSHA regulations and focuses on the prevention of injuries associated with the hazards.

The course can be held in three long days, or in four standard work days. The course can be tailored to meet your company specific needs.  Please contact Ken at SHE Solutions to schedule this course.

This course can be scheduled at your facility or job site.

The course is conducted using digitally projected PowerPoint presentations, hands on equipment demonstrations, videos, and classroom discussions.

Investment:

This course is offered by the competition for $995, and with the competitions course - you may have to pay travel expenses to attend.

SHE Solutions will conduct the four day, 30 Hour training, at your facility for the following price:

$ 8,700 for the following areas (Training for up to 20 attendees at your site, includes instructor travel costs and handouts.  Additional attendees $200 each)    
Albuquerque, NM – ABQ; Burbank, CA – BUR; Denver, CO – DEN; El Paso, TX – ELP; Las Vegas, NV –LAS; Los Angeles, CA – LAX; Oakland, CA –OAK; Ontario, CA – ONT; Phoenix, AZ – PHX; Reno, NV – RNO; Sacramento, CA – SMF; Salt Lake City, UT – SLC; San Diego, CA – SAN, San Jose, CA – SJC; San Francisco, CA – SFO; and Tucson, AZ – TUS.   

$ 10,000 for the following areas (Training for up to 25 attendees, includes instructor travel costs and handouts.  Additional attendees $200 each)
Albany, NY – ALB; Amarillo, TX – AMA; Austin, TX – AUS; Baltimore, MD –BWI; Birmingham, AL – BHM; Boise, ID – BOI; Buffalo, NY –BUF; Chicago, IL – MDW; Cleveland, OH – CLE; Columbus, OH – CMH; Corpus Christi, TX – CRP; Dallas, TX – DAL; Detroit, MI – DTW; Ft. Lauderdale, FL – FLL; Ft. Meyers, FL – RSW; Harlingen, TX– HRL; Hartford, CT – BDL; Houston, TX – HOU; Indianapolis, IN– IND; Jackson, MS – JAN; Jacksonville, FL – JAX; Kansas City, MO – MCI; Little Rock, AR – LIT; Long Island, NY – ISP; Louisville, KY – SDF; Lubbock, TX – LBB; Manchester, NH – MHT; Midland, TX – MAF; Nashville, TN –BNA; New Orleans, LA – MSY; New York, NY – ISP; Norfolk, VA – ORF;  Oklahoma City, OK – OKC; Omaha, NE – OMA; Orlando, FL – MCO; Philadelphia, PA – PHL; Pittsburgh, PA – PIT; Portland, OR – PDX; Providence, RI – PVD; Raleigh, NC –RDU; St. Louis, MO – STL; San Antonio, TX – SAT; Seattle, WA – SEA; Spokane, WA – GEG; Tampa Bay, FL – TPA; Tulsa, OK – TUL; Washington, DC – IAP; and West Palm Beach, FL – PBI.

DESIGNATED TRAINING TOPICS

30-HOUR CONSTRUCTION INDUSTRY OUTREACH TRAINING PROGRAM
The 30-hour Construction Outreach Training Program is intended to provide a variety of training to workers with some safety responsibility. Workers must receive additional training on hazards specific to their job. Training emphasizes hazard identification, avoidance, control and prevention, not OSHA standards.  Instructional time is a minimum of 30 hours. OSHA subpart references are provided for informational purposes; training emphasizes hazard awareness.

Breakdown of topics as follows:

  •  Mandatory - 12 hours: Five topics to be taught, ranging from one to five hours each

  • Elective - 12 hours: Choose at least six of these topics to teach, for a minimum of one-half hour each

  • Optional - 6 hours: Teach any other construction industry hazards or policies and/or expand on the mandatory or elective topics, minimum of one-half hour each

30- HOUR MANDATORY COURSE TOPICS

Introduction to OSHA - at least Two Hours

  •  OSH Act, General Duty Clause, Employer and Employee Rights and Responsibilities, Whistleblower Rights, Recordkeeping basics

  • Inspections, Citations, and Penalties

  • General Safety and Health Provisions, Competent Person, Subpart C

  • Value of Safety and Health

  • OSHA Website, OSHA 800 number and available resources

OSHA Focus Four Hazards- at least Five Hours (must cover all four areas – minimum 30 minutes on each)

  • Fall Protection, Subpart M (e.g., floors, platforms, roofs)

  • Electrical, Subpart K (e.g., overhead power lines, power tools and cords, temporary wiring, grounding)

  • Struck by (e.g., falling objects, trucks, cranes, constructing masonry walls)

  • Caught in/between (e.g., trench hazards, unguarded machinery, equipment)

Personal Protective and Lifesaving Equipment, at least Two Hours

Health Hazards in Construction at least Two Hours

Stairways and Ladders, Subpart X at least One Hour

ELECTIVES

30-HOUR ELECTIVE COURSE TOPICS
Choose at least 6 of the following topics - Must add up to at least 12 hours

  • Fire Protection and Prevention, Subpart F

  • Materials Handling, Storage, Use and Disposal, Subpart H

  • Tools - Hand and Power, Subpart I

  • Welding and Cutting, Subpart J

  • Scaffolds, Subpart L

  • Cranes, Derricks, Hoists, Elevators, and Conveyors, Subpart N

  • Motor Vehicles, Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals and Barricades, Subparts O, W, and G

  • Excavations, Subpart P

  • Concrete and Masonry Construction, Subpart Q

  • Steel Erection, Subpart R

  • Safety and Health Program

  • Confined Space Entry

  • Powered Industrial Vehicles

  • Ergonomics

Contact Information

Please contact Ken Mushet at SHE Solutions to schedule this 30 Hour OSHA course.  Thank you for considering SHE Solutions.

SHE Solutions, LLC
Safety, Health, and Environmental - Training, Audits, & Compliance
Ken Mushet, CSP, REM - President/ Principal Consultant
Mailing Address:  581 W. Locust Dr. Chandler, AZ 85248
Office (480) 883-7218 - Fax (866) 744-5325
www.shesolutions.com,  kmushet@shesolutions.com

SHE Solutions, LLC  © 2003 – 2010