|
The 30 Hour OSHA
General Industry Course is available as an on-line course, or we can
come to your location and
present it to your employees.
If
you have a small group of employees that need the OSHA
training course, the on-line version may be more cost
effective.
Both of the options are outlined below. You can click
on
the factory to get to the on-line course.
On-line Safety
Courses Now Available!
-
Get your Department of Labor (DOL)
Completion card by taking the OSHA accepted 10-hour or 30-hour course
for construction or general industry on-line.
-
Click on the link above, enroll on-line,
and complete the course at your pace to receive your DOL card by mail.
-
24 X 7 access to job-critical online
training.
-
Quality instructional content validated by
industry experts.
-
Affordable courses available with minimal
computer system requirements.
-
Corporate billing accounts available for
high volume clients.
-
Presentation keeps employees engaged, not
bored.
-
Safe on-line credit card transactions with
HTTPS technology and SSL Encryption.
-
Visa ®, MasterCard ®, Discover ®, American
Express ®, or Telecheck ®.
-
SHE Solutions, LLC has and affiliation
with 360training.com to provide the on-line courses. The 10 and 30
Hour Courses are Powered by 360training.com. On-line 10 and 30-hour
courses are accepted by OSHA. When you click on the link, you are
taken to the SHE Solutions, LLC Virtual University on the
360training.com website.
-
Customer Support contact information for
the 360training.com on-line courses is 888-360-TRNG.
-
The Outreach courses offered by
360training.com are OSHA accepted courses.
-
The SHE Solutions, LLC On-line training
courses offered by 360training.com, Outreach Trainer is Michael
Millsap (mike.millsap@360training.com)
-
If an on-line student is in need of proof
of completion for their job site please have them email the On-line
training courses Outreach Trainer listed above, and they will provide
one if the student completes all requirements. A downloadable
completion certificate is not provided.
-
Upon completion of the 10-hour or 30-hour
course, you will receive a completion card from the Department of
Labor within 4-8 weeks. You must complete the end of course survey to
receive your card.
NOTE: Please complete the OSHA survey at the end of the OSHA 10 hour
or OSHA 30 Hour Outreach course. If you do not complete the OSHA
mandated course survey within three (3) months of completion,
360training.com will not be able to issue a Department of Labor (DOL)
card. If the 3 months has elapsed, you will be required to purchase
the course again and retake the course from the beginning. If you are
purchasing this course for your employee, please make them aware of
this requirement.
-
Thank you for considering the on-line
courses.
At your
location, 30 Hour OSHA General Industry Course
This course is part
of the OSHA Outreach Training and participants who successfully complete
the course will receive a 30 Hour General Industry card directly from
OSHA. The course reviews the hazards associated in general industry
through a review of OSHA regulations and focuses on the prevention of
injuries associated with the hazards.
The course can
be held in three long days, or in four standard work days. The course
can be tailored to meet your company specific needs. Please contact Ken
at SHE Solutions to schedule this course.
This course can
be scheduled at your facility.
The course is
conducted using digitally projected PowerPoint presentations, hands on
equipment demonstrations, videos, and classroom discussions.
If your company is located in
California, I can tailor the course to cover the Cal/OSHA Title 8 Safety
Orders.
By
having the 30 Hour OSHA General Industry course at your location, we are
able to lower the cost substantially with lower overhead costs.
Another cost savings
benefit of an on site course is that your attendees may not have to
travel. Instead, you only pay for the instructors travel. Although you
are allowed up to 20 employees in the course pricing to add value, this
course may be cost effective for just a small group of employees.
There are no
additional fees for course materials or the 30 Hour OSHA General
Industry
Cards. Cards can be provided a few weeks later, upon receipt of check
payment.
Out of Arizona
travel requires a Purchase Order or commitment to pay.
Investment:
This course is offered by the competition for $995, and with the
competitions course - you may have to pay travel expenses to attend.
SHE Solutions will conduct the four day, 30 Hour training, at your
facility for the following price:
$ 8,700 for the
following areas (Training for up to 20 attendees at your site, includes
instructor travel costs and handouts. Additional attendees $200 each)
Albuquerque, NM – ABQ; Burbank, CA – BUR; Denver, CO – DEN; El Paso, TX
– ELP; Las Vegas, NV –LAS; Los Angeles, CA – LAX; Oakland, CA –OAK;
Ontario, CA – ONT; Phoenix, AZ – PHX; Reno, NV – RNO; Sacramento, CA –
SMF; Salt Lake City, UT – SLC; San Diego, CA – SAN, San Jose, CA – SJC;
San Francisco, CA – SFO; and Tucson, AZ – TUS.
$ 10,000 for the
following areas (Training for up to 25 attendees, includes instructor
travel costs and handouts. Additional attendees $200 each)
Albany, NY – ALB; Amarillo, TX – AMA; Austin, TX – AUS; Baltimore, MD –BWI;
Birmingham, AL – BHM; Boise, ID – BOI; Buffalo, NY –BUF; Chicago, IL –
MDW; Cleveland, OH – CLE; Columbus, OH – CMH; Corpus Christi, TX – CRP;
Dallas, TX – DAL; Detroit, MI – DTW; Ft. Lauderdale, FL – FLL; Ft.
Meyers, FL – RSW; Harlingen, TX– HRL; Hartford, CT – BDL; Houston, TX –
HOU; Indianapolis, IN– IND; Jackson, MS – JAN; Jacksonville, FL – JAX;
Kansas City, MO – MCI; Little Rock, AR – LIT; Long Island, NY – ISP;
Louisville, KY – SDF; Lubbock, TX – LBB; Manchester, NH – MHT; Midland,
TX – MAF; Nashville, TN –BNA; New Orleans, LA – MSY; New York, NY – ISP;
Norfolk, VA – ORF; Oklahoma City, OK – OKC; Omaha, NE – OMA; Orlando,
FL – MCO; Philadelphia, PA – PHL; Pittsburgh, PA – PIT; Portland, OR –
PDX; Providence, RI – PVD; Raleigh, NC –RDU; St. Louis, MO – STL; San
Antonio, TX – SAT; Seattle, WA – SEA; Spokane, WA – GEG; Tampa Bay, FL –
TPA; Tulsa, OK – TUL; Washington, DC – IAP; and West Palm Beach, FL –
PBI.
30-HOUR GENERAL
INDUSTRY OUTREACH TRAINING PROGRAM
The 30-hour General
Industry Outreach Training Program is intended to provide a variety of
training to people with some safety responsibility. Workers must receive
additional training on hazards specific to their job. Training should
emphasize hazard identification, avoidance, control and prevention, not
OSHA standards. Instructional time must be a minimum of 30 hours.
Breakdown of topics as
follows:
● Mandatory - 11
hours: Seven topics to be taught, ranging from one to two hours each
● Elective - 10
hours: Choose at least five of these topics to teach, for a minimum
of one-half hour each
● Optional - 9
hours: Teach any other general industry hazards or policies and/or
expand on the mandatory or elective topics, minimum of one-half hour
each
30-HOUR MANDATORY
COURSE TOPICS
Introduction to OSHA -
at least Two
Hours
● OSH Act, General Duty
Clause, Employer and Employee Rights and Responsibilities, Whistleblower
Rights, Recordkeeping basics
● Inspections,
Citations, and Penalties
● Value of Safety and
Health
● OSHA Website, OSHA
800 number and available resources
Walking and Working
Surfaces – including fall protection,
Subpart D - at least One Hour
Exit Routes, Emergency
Action Plans, Fire Prevention Plans, and Fire Protection,
Subparts E & L - at least Two Hours
Electrical,
Subpart S - at
least Two Hours
Personal Protective
Equipment (PPE),
Subpart I - at
least One Hour
Materials Handling,
Subpart N
- at least Two Hours
Hazard Communication,
Subpart Z
- at least One Hour
30-HOUR ELECTIVE COURSE
TOPICS
Choose at least 5 of
the following topics - Must add up to at least 10 hours
● Hazardous Materials
(Flammable and Combustible Liquids, Spray Finishing, Compressed Gases,
Dipping and Coating Operations), Subpart H
● Permit-Required
Confined Spaces, Subpart J
● Lockout / Tagout,
Subpart J
● Machine Guarding,
Subpart O
● Welding, Cutting, and
Brazing, Subpart Q
● Introduction to
Industrial Hygiene, Subpart Z
● Bloodborne Pathogens,
Subpart Z
● Ergonomics
● Fall Protection
● Safety and Health
Programs
● Powered
Industrial Vehicles
Contact
Information
Please contact Ken
Mushet at SHE Solutions to schedule this 30 Hour OSHA course. Thank you
for considering SHE Solutions.
SHE
Solutions, LLC
Safety, Health, and Environmental - Training, Audits, & Compliance
Ken Mushet, CSP, REM - President/ Principal Consultant
Mailing Address: 581 W. Locust Dr. Chandler, AZ 85248
Office (480) 883-7218 - Fax (866) 744-5325
www.shesolutions.com,
kmushet@shesolutions.com
SHE Solutions,
LLC ©
2003 – 2010 |
